Posts Tagged ‘hair damage’

You cannot remove a tint with a tint.  The only way to remove color from hair is with commercial products used to remove penetrating tints.  Always follow the directions precisely when using these products.  These products are tint or color removers that have been formulated to diffuse the pigment and may be mixed with hydrogen peroxide.  Before using the products, your hair needs to be checked for damage or dryness and a conditioning program should be performed before using the color remover to prevent further damage.

Damaged hair can be caused by blow drying, wind, harsh shampoos, or hair that has been over processed by the use hair chemicals. Build up of hair spray and styling agents can cause problems.  Hair should be clean properly and prepared prior to color removal.  After the color removal, process the hair should again be conditioned so the porosity of the hair can be evened before applying more color.  A waiting period is recommended before applying any chemicals to the hair.

It is not recommended to perform this procedure yourself.  You need a professional hair colorist who can accurately assess hair damage and recommend a proper color remover.  If the hair color is extremely dark, hair damage can occur when using the color removal chemicals.  Always let your colorist know what you have done or put on your hair.  If you are planning to do it yourself you need to educate yourself regarding the chemicals you will be using and have someone help you.

After you have pre-conditioned your hair prior to using the color remover; then after you have removed the color you need to normalize the hair PH with a finishing rinse.  Wait until you have reconditioned the hair before any more chemicals are put on the hair.

How do you determine if hair is damaged?  Hair is damaged if it is over-porous, brittle and dry, has breakage caused by no elasticity or give, color absorbs or fades very rapidly, when wet it has a spongy feeling, or if the hair shaft feels rough and you can see split ends.  Any of these conditions present can cause problems unless you pre-condition your hair before a treatment and after.

Always use quality hair products that have been formulated to use with various chemical treatments.  Your hair colorist can recommend such products.   It is a good practice to either condition your hair at home with a leave in treatment or make an appointment at your salon for a conditioning treatment between chemical appointments.

Hair bonding glue is usually used when applying “tracks” directly to the head or on a wig cap.  Although it is one of the most inexpensive methods of applying a hair weave, the cost to natural hair can be detrimental, making the use of hair bonding glue potentially not worth it.  In addition to the glue being a pain to remove, if not removed properly the glue will leave a sticky residual on the hair, which can cause hair damage, and possibly cause hair to fall out.  To prevent this outcome, there are several ways to ensure hair bonding glue is completely removed and to gaurantee that natural hair remains safe and healthy. 

Hair bonding glue remover shampoo is sold in most stores, and is applied just as a regular shampoo would be.  Wet hair and massage the remover shampoo into the hair focusing mainly on the scalp until the tracks begin to loosen up.  When the tracks are loose enough they will slide out gently with a small tug.  Once all of the tracks are out, rinse hair, then shampoo and condition hair with whatever other products are available.  After the conditioner is out, all hair glue should be removed.  If there is still some residual hair glue left on the hair or scalp, use oil sheen or hair oil to saturate the area.  Then, whatever residuals are left should comb out easily.

If hair bonding glue remover shampoo is not available, or if just looking for an inexpensive option to remove hair bonding glue, there is a product that can be helpful that is found in most kitchens. Olive Oil is very helpful in removing hair glue, although it can be messy.  For this method of removal, in addition to the olive oil, a towel should be draped on the shoulders, and a comb should be handy.  Saturate each track one by one in olive oil, massaging along the way.  Once tracks are saturated, they should slide out quickly. For the tracks that are a little harder to remove, just add a little more olive oil and continue to massage scalp.  Once all of the tracks are removed, comb hair thoroughly.  If there residual glue on the hair or scalp, it should all be out after a shampoo and conditioner treatment.

A lot of people stay away from hair bonding glue because of the effects on the hair when not taken care of and removed properly, but, by following these tips, removal of hair bonding glue should never be a problem again.

Hair bonding glue is usually used when applying “tracks” directly to the head or on a wig cap.  Although it is one of the most inexpensive methods of applying a hair weave, the cost to natural hair can be detrimental, making the use of hair bonding glue potentially not worth it.  In addition to the glue being a pain to remove, if not removed properly the glue will leave a sticky residual on the hair, which can cause hair damage, and possibly cause hair to fall out.  To prevent this outcome, there are several ways to ensure hair bonding glue is completely removed and to gaurantee that natural hair remains safe and healthy. 

Hair bonding glue remover shampoo is sold in most stores, and is applied just as a regular shampoo would be.  Wet hair and massage the remover shampoo into the hair focusing mainly on the scalp until the tracks begin to loosen up.  When the tracks are loose enough they will slide out gently with a small tug.  Once all of the tracks are out, rinse hair, then shampoo and condition hair with whatever other products are available.  After the conditioner is out, all hair glue should be removed.  If there is still some residual hair glue left on the hair or scalp, use oil sheen or hair oil to saturate the area.  Then, whatever residuals are left should comb out easily.

If hair bonding glue remover shampoo is not available, or if just looking for an inexpensive option to remove hair bonding glue, there is a product that can be helpful that is found in most kitchens. Olive Oil is very helpful in removing hair glue, although it can be messy.  For this method of removal, in addition to the olive oil, a towel should be draped on the shoulders, and a comb should be handy.  Saturate each track one by one in olive oil, massaging along the way.  Once tracks are saturated, they should slide out quickly. For the tracks that are a little harder to remove, just add a little more olive oil and continue to massage scalp.  Once all of the tracks are removed, comb hair thoroughly.  If there residual glue on the hair or scalp, it should all be out after a shampoo and conditioner treatment.

A lot of people stay away from hair bonding glue because of the effects on the hair when not taken care of and removed properly, but, by following these tips, removal of hair bonding glue should never be a problem again.

Hair bonding glue is usually used when applying “tracks” directly to the head or on a wig cap.  Although it is one of the most inexpensive methods of applying a hair weave, the cost to natural hair can be detrimental, making the use of hair bonding glue potentially not worth it.  In addition to the glue being a pain to remove, if not removed properly the glue will leave a sticky residual on the hair, which can cause hair damage, and possibly cause hair to fall out.  To prevent this outcome, there are several ways to ensure hair bonding glue is completely removed and to gaurantee that natural hair remains safe and healthy. 

Hair bonding glue remover shampoo is sold in most stores, and is applied just as a regular shampoo would be.  Wet hair and massage the remover shampoo into the hair focusing mainly on the scalp until the tracks begin to loosen up.  When the tracks are loose enough they will slide out gently with a small tug.  Once all of the tracks are out, rinse hair, then shampoo and condition hair with whatever other products are available.  After the conditioner is out, all hair glue should be removed.  If there is still some residual hair glue left on the hair or scalp, use oil sheen or hair oil to saturate the area.  Then, whatever residuals are left should comb out easily.

If hair bonding glue remover shampoo is not available, or if just looking for an inexpensive option to remove hair bonding glue, there is a product that can be helpful that is found in most kitchens. Olive Oil is very helpful in removing hair glue, although it can be messy.  For this method of removal, in addition to the olive oil, a towel should be draped on the shoulders, and a comb should be handy.  Saturate each track one by one in olive oil, massaging along the way.  Once tracks are saturated, they should slide out quickly. For the tracks that are a little harder to remove, just add a little more olive oil and continue to massage scalp.  Once all of the tracks are removed, comb hair thoroughly.  If there residual glue on the hair or scalp, it should all be out after a shampoo and conditioner treatment.

A lot of people stay away from hair bonding glue because of the effects on the hair when not taken care of and removed properly, but, by following these tips, removal of hair bonding glue should never be a problem again.

You cannot remove a tint with a tint.  The only way to remove color from hair is with commercial products used to remove penetrating tints.  Always follow the directions precisely when using these products.  These products are tint or color removers that have been formulated to diffuse the pigment and may be mixed with hydrogen peroxide.  Before using the products, your hair needs to be checked for damage or dryness and a conditioning program should be performed before using the color remover to prevent further damage.

Damaged hair can be caused by blow drying, wind, harsh shampoos, or hair that has been over processed by the use hair chemicals. Build up of hair spray and styling agents can cause problems.  Hair should be clean properly and prepared prior to color removal.  After the color removal, process the hair should again be conditioned so the porosity of the hair can be evened before applying more color.  A waiting period is recommended before applying any chemicals to the hair.

It is not recommended to perform this procedure yourself.  You need a professional hair colorist who can accurately assess hair damage and recommend a proper color remover.  If the hair color is extremely dark, hair damage can occur when using the color removal chemicals.  Always let your colorist know what you have done or put on your hair.  If you are planning to do it yourself you need to educate yourself regarding the chemicals you will be using and have someone help you.

After you have pre-conditioned your hair prior to using the color remover; then after you have removed the color you need to normalize the hair PH with a finishing rinse.  Wait until you have reconditioned the hair before any more chemicals are put on the hair.

How do you determine if hair is damaged?  Hair is damaged if it is over-porous, brittle and dry, has breakage caused by no elasticity or give, color absorbs or fades very rapidly, when wet it has a spongy feeling, or if the hair shaft feels rough and you can see split ends.  Any of these conditions present can cause problems unless you pre-condition your hair before a treatment and after.

Always use quality hair products that have been formulated to use with various chemical treatments.  Your hair colorist can recommend such products.   It is a good practice to either condition your hair at home with a leave in treatment or make an appointment at your salon for a conditioning treatment between chemical appointments.